搜索
查看: 16801|回复: 7

[水] win8下的openVPN连接成功但无法使用

[复制链接]
发表于 2014-5-17 22:11:00 | 显示全部楼层 |阅读模式
在win8下安装openVPN之后只有第一次能够正常使用,只要退出openVPN之后,再次登陆虽然提示已经成功链接,但是还是无法正常使用,通过对比原来的日志,发现是
Sat May 17 15:42:56 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:42:56 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:42:59 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:42:59 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:01 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:01 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:02 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:02 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:03 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:03 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:04 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:04 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:06 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:06 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:07 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:07 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:08 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:08 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:10 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:10 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:11 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:11 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:12 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:12 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:14 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:14 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:15 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:15 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:17 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:17 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:18 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:18 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:19 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:19 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:20 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:20 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:22 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:22 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:23 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:23 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:24 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:24 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:25 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
Sat May 17 15:43:25 2014 Route: Waiting for TUN/TAP interface to come up...
Sat May 17 15:43:26 2014 TEST ROUTES: 0/0 succeeded len=64 ret=0 a=0 u/d=down
这些的u/d一直为down,如果能正常连接的话应该会出现u/d=up的,不知道是什么原因,还请大神赐教!!!
回复

使用道具 举报

发表于 2014-5-17 22:38:28 | 显示全部楼层
回复

使用道具 举报

发表于 2014-5-17 22:52:03 | 显示全部楼层
open vpn对win 8兼容性怎么样?我怀疑是兼容性的问题,试下用xp 兼容模式运行下!

评分

1

查看全部评分

回复

使用道具 举报

 楼主| 发表于 2014-5-18 14:30:35 | 显示全部楼层
8680765 发表于 2014-5-17 22:52
open vpn对win 8兼容性怎么样?我怀疑是兼容性的问题,试下用xp 兼容模式运行下! ...

提示“Initialization Sequence Completed With Errors”,我百度了相关的原因,说是因为DHCP服务没有开启或者是防火墙的原因,但是我查看了服务DHCP服务是一直开启的,防火墙也被我完全关闭了,还是不行,还请指教!
回复

使用道具 举报

发表于 2014-5-20 23:03:34 | 显示全部楼层
本帖最后由 8680765 于 2014-5-20 23:05 编辑
硫酸亚铜 发表于 2014-5-18 14:30
提示“Initialization Sequence Completed With Errors”,我百度了相关的原因,说是因为DHCP服务没有开 ...

这里有个案例和你的一样,应该是兼容性的问题,你试下用管理员权限运行  。http://www.zhizhihu.com/html/y2013/4405.html
  • 如果你是win8x64,需要禁用驱动强制签名后再安装openvpn
  • openvpn需要以管理员方式启动,否则即使连接成功,你也无法翻墙。右键OpenVPN GUI快捷方式,兼容性里面勾选管理员方式运行,以后即可一劳永逸。




回复

使用道具 举报

 楼主| 发表于 2014-5-21 14:26:54 | 显示全部楼层
8680765 发表于 2014-5-20 23:03
这里有个案例和你的一样,应该是兼容性的问题,你试下用管理员权限运行  。http://www.zhizhihu.com/html/ ...

这些我都看了。,都试过了,不行啊、
回复

使用道具 举报

发表于 2014-11-13 23:15:23 | 显示全部楼层
LZ这个问题解决了没
回复

使用道具 举报

 楼主| 发表于 2014-11-15 00:59:55 | 显示全部楼层
nkc3g4 发表于 2014-11-13 23:15
LZ这个问题解决了没

没能解决,大哥解决了?
回复

使用道具 举报

联系我们(Contact)|手机版|萝卜头IT论坛 ( 苏ICP备15050961号-1 )

GMT+8, 2024-11-23 13:09 , Processed in 0.085629 second(s), 21 queries , Gzip On.

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回复 返回顶部 返回列表